if you use gdb and eclipse, you can follow the description on this page
under "How use GDB with Eclipse and Tmote Sky":
http://www.btnode.ethz.ch/Projects/TinyOS2
Anthony O'Shaughnessy wrote:
Thanks for that Roman. Have you used a debugger via the JTAG before? Is
there any info you could point me to in getting started with one?
Thanks,
AOS
> Date: Mon, 31 Mar 2008 14:36:03 +0200
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> CC: [email protected]
> Subject: Re: [Tinyos-help] Verifying power down mode on a telos mote
>
> Anthony O'Shaughnessy wrote:
> >
> > Hi,
> >
> > I am just wondering is there any other way of verifying that a mote
has
> > entered a power down state e.g. LPM3, other than measuring the current
> > across the power terminals?
> you could run a debugger via jtag, set a breakpoint in the McuSleepC
> component and find out the value that is assigned to pState.
>
> > I was trying to light up the 3 LEDs, then try enter LPM3 by entering a
> > low power state and see if the LEDs turn off.
> > The LEDs are controlled by pins 50 (P5.6/ACLK), 49 (P5.5/SMCLK) and 48
> > (P5.4/MCLK) on the MSP430.
> > By using the LEDs, does it prevent the MSP430 from entering a low
power
> > state?
> no
> >
>
> > Thanks.
> > AOS
> >
>
> roman
------------------------------------------------------------------------
Test your Star IQ Play now!
<http://club.live.com/red_carpet_reveal.aspx?icid=redcarpet_HMTAGMAR>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
