Seems like a radio communication problem. It's possible that the remote mote and base station are not communicating. Assuming that your hardware is working ok, ensure that you program both motes to operate on the same frequency.
-Brian On Tue, Apr 1, 2008 at 10:31 AM, shankar satish <[EMAIL PROTECTED]> wrote: > Hi All, > > On a remote mote, I have installed OscilloscopeRF(It broadcasts Photo > sensor values). On the base-station mote, I have installed TOSBase. The > base-station mote is connected to the PC. After this, I set MOTECOM values > appropriately and ran the "listen" tool. > The "Listen" tool permanently displays "resynchronizing" message, and > never prints the values. > > The "Listen" tool runs properly when the base-station is installed with > Oscilloscope. (Oscilloscope sends photo sensor values directly over UART). > > Any pointers and help is much appreciated. > > Thank you. > > -Regards, > Shankar. > > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
