Try using ListenRaw to see what you are really getting. One possibility is that Listen is expecting a different TOS_Msg format than the one being received. This is flagged in the MOTECOM variable, e.g.: [EMAIL PROTECTED]:tmote and [EMAIL PROTECTED]:mica2 will use different AM headers...
MS renjie huang wrote: > It should not be caused by sensor data but UART transmission. > You can first check whether the data length field in the packet is > correct or not. > > > On 4/18/08, *Maria Taramigkou* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Hello!!! > > I have loaded the Oscilloscope and TOSBase applications on 2 > motes..I execute the Listen.java and the results are the following > > [EMAIL PROTECTED]:115200: resynchronising > [EMAIL PROTECTED]:115200: bad packet > [EMAIL PROTECTED]:115200: bad packet > [EMAIL PROTECTED]:115200: bad packet > [EMAIL PROTECTED]:115200: packet too long > [EMAIL PROTECTED]:115200: resynchronising > [EMAIL PROTECTED]:115200: bad packet > [EMAIL PROTECTED]:115200: bad packet > > > * > I wanted to know whether these sensor results could be a matter of > baudrate or something else... > THank you!! > > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > <mailto:[email protected]> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > -- > Renjie Huang > Sensorweb Research Laboratory > http://sensorweb.vancouver.wsu.edu/ > Washington State University > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
