Janos, others
it still does not work :(
I am really desperate as i have already requested an extension for my
project and it is due in 1 day, and i still cannot get even Blink to run on
the iris motes.
Here is a description of what i have tried since your last email.
1.as suggested by you, i downloaded the tos-set-symbols file, you sent, to
my /usr/bin
I am running cygwin on windows, and i downloaded it into my C:\cygwin\bin
folder.
I did not replace the existing tos-set-symbols file, instead i renamed the
original tos-set-symbols file(in C:\cygwin\bin) to tos-set-symbols_old.
[EMAIL PROTECTED] /usr/bin
*$ pwd
*/usr/bin
[EMAIL PROTECTED] /usr/bin
*$ ls -alp tos-set*
*-rwx------+ 1 User None 5105 Apr 22 20:30 tos-set-symbols
-rwxr-xr-x 1 User None 5104 Jul 29 2007 tos-set-symbols_old
I also saved a copy, in the C:\cygwin\usr\bin folder which was empty
initially, but that did not make any difference
2. Now i tried running first make iris, which worked, as before & then the
install command, which did not work, as before :(
commands are in bold below
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
*$ make iris*
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfi
le=build/iris/app.c -board=micasb -DIDENT_PROGRAM_NAME=\"BlinkAppC\"
-DIDENT_USE
R_ID=\"User\" -DIDENT_HOSTNAME=\"LENOVO-F238501F\"
-DIDENT_USER_HASH=0xa90f30ddL
-DIDENT_UNIX_TIME=0x480e8495L -DIDENT_UID_HASH=0xf5544823L
-fnesc-dump=wiring -
fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
comp
onents)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2434 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
*$ make iris install,42 mib510,COM5*
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfi
le=build/iris/app.c -board=micasb -DIDENT_PROGRAM_NAME=\"BlinkAppC\"
-DIDENT_USE
R_ID=\"User\" -DIDENT_HOSTNAME=\"LENOVO-F238501F\"
-DIDENT_USER_HASH=0xa90f30ddL
-DIDENT_UNIX_TIME=0x480e8505L -DIDENT_UID_HASH=0x8ee0f2e1L
-fnesc-dump=wiring -
fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
comp
onents)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2434 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-42
TOS_NODE_ID=42
ActiveMessageAddressC$addr=42
Could not find data section in build/iris/main.exe, aborting.
Could not find symbol ActiveMessageAddressC$addr in build/iris/main.exe,
ignorin
g symbol.
Could not find symbol TOS_NODE_ID in build/iris/main.exe, ignoring symbol.
installing iris binary using mib510
uisp -dprog=mib510 -dserial=COM5 --wr_fuse_h=0xd9 -pm1281 -U efuse:w:0xff:m
--e
rase --upload if=build/iris/main.srec.out-42
Please use /dev/ttyS4 rather than COM5 (the latter often doesn't work)
No part specified, supported devices are:
AT90S4414
AT90S2313
AT90S1200
AT90S2323
AT90S2343
AT90S2333
AT90S4433
AT90S4434
AT90S8515
AT90S8535
AT90S8534
ATmega8515
ATmega8535
ATtiny11
ATtiny12
ATtiny15
ATtiny22
ATtiny26
ATtiny28
ATmega8
ATmega323
ATmega32
ATmega161
ATmega163
ATmega16
ATmega162
ATmega169
ATmega103
ATmega128
make: *** [program] Error 2
3. I tried some more permutations,
a) used .(period) instead of comma, but that did not work
b) used /dev/ttyS4 instead of COM5, did not work
c) used mib520 instead of mib510....did not work
*I still get the same error,in [ ] below, with the line, make: *** [program]
Error 2, at the end of the erro
*
[
*$ make iris install.0 mib510./dev/ttyS4*
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfi
le=build/iris/app.c -board=micasb -DIDENT_PROGRAM_NAME=\"BlinkAppC\"
-DIDENT_USE
R_ID=\"User\" -DIDENT_HOSTNAME=\"LENOVO-F238501F\"
-DIDENT_USER_HASH=0xa90f30ddL
-DIDENT_UNIX_TIME=0x480ecfb5L -DIDENT_UID_HASH=0x6a6934f1L
-fnesc-dump=wiring -
fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
comp
onents)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2434 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-0
TOS_NODE_ID=0 Ac
tiveMessageAddressC$addr=0
*Could not find data section in build/iris/main.exe, aborting.*
*Could not find symbol ActiveMessageAddressC$addr in build/iris/main.exe,
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/iris/main.exe, ignoring symbol.
installing iris binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyS4 --wr_fuse_h=0xd9 -pm1281 -U
efuse:w:0xff:
m --erase --upload if=build/iris/main.srec.out-0
No part specified, supported devices are:
*AT90S4414
AT90S2313
AT90S1200
AT90S2323
AT90S2343
AT90S2333
AT90S4433
AT90S4434
AT90S8515
AT90S8535
AT90S8534
ATmega8515
ATmega8535
ATtiny11
ATtiny12
ATtiny15
ATtiny22
ATtiny26
ATtiny28
ATmega8
ATmega323
ATmega32
ATmega161
ATmega163
ATmega16
ATmega162
ATmega169
ATmega103
ATmega128
make: *** [program] Error 2
]
Where am i going wrong ?
Any suggestions/ideas/workarounds /hacks welcome
Thanks a ton all of you,
Eagerly awaiting all your responses
cheers
ashish
======================================================================================================================================================================================================================
On Tue, Apr 22, 2008 at 11:47 AM, Janos Sallai <[EMAIL PROTECTED]>
wrote:
Ashis,
Good point. When you compile Blink with avr-gcc 4, indeed, there is no data
section. For most other apps there is, so tos-set-symbols wouldn't fail.
Please replace /usr/bin/tos-set-symbols with the attached one. It'll fix
your problem.
Janos
From: ashish makani [mailto:[EMAIL PROTECTED]
Sent: Monday, April 21, 2008 11:56 PM
To: Janos Sallai
Cc: [email protected]
Subject: Re: [Tinyos-help] Still unable to program Blink onto a crossbow
irismote(XM2110) using the MIB520 USB interface board on tinyos-2.0.2(using
cygwin on Windows XP )
Hi Janos, others
First up, thanks a million for your extremely helpful & informative
response.
I tried it, & it almost worked, but did not :)
1. I followed the IRIS instructions given on this ISIS link
http://www.isis.vanderbilt.edu/projects/NEST/tinyos-2.x-iris/doc/html/install-tinyos-iris.html
I made 1 goof-up( ?) though...i did step-4,updating the tinyos source tree,
in the instructions above, first,
and then did step 2 &3, updating the atmel toolchain( avr-binutils,
avr-libc, avr-gcc) & installing avrdude.
I think step-4, we are not really *installing* anything, so i should be
fine, but just wanted to make sure.
2. I then tried compiling for iris & it works
here is what i see as output, when i type the command "make iris" from the
/opt/tinyos-2.x/apps/Blink directory .
<<>>
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
$ make iris
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfi
le=build/iris/app.c -board=micasb -DIDENT_PROGRAM_NAME=\"BlinkAppC\"
-DIDENT_USE
R_ID=\"User\" -DIDENT_HOSTNAME=\"LENOVO-F238501F\"
-DIDENT_USER_HASH=0xa90f30ddL
-DIDENT_UNIX_TIME=0x480d68b4L -DIDENT_UID_HASH=0xd3494904L
-fnesc-dump=wiring -
fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
comp
onents)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2434 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
$ ls -alp
total 697
drwxr-xr-x+ 4 User None 0 Apr 18 15:18 ./
drwxr-xr-x+ 18 User None 0 Apr 18 15:21 ../
-rw-r--r-- 1 User None 2120 Dec 12 2006 BlinkAppC.nc
-rw-r--r-- 1 User None 2384 Dec 12 2006 BlinkC.nc
drwxr-xr-x+ 2 User None 0 Apr 18 15:18 CVS/
-rw-r--r-- 1 User None 42 Jul 12 2006 Makefile
-rw-r--r-- 1 User None 678 Dec 12 2006 README.txt
-rw-r--r-- 1 User None 0 Apr 17 21:57 _TOSSIM.dll
-rw-r--r-- 1 User None 698415 Apr 17 21:59 app.xml
drwxr-xr-x+ 4 User None 0 Apr 22 00:25 build/
<<>>
3.
However, when i try to install the compiled blink code, onto the mote, i get
a "Could not find data section in build/iris/main.exe, aborting.
make: *** [setid] Error 255 "
{
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
$ make iris install.0 mib510,COM5
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfi
le=build/iris/app.c -board=micasb -DIDENT_PROGRAM_NAME=\"BlinkAppC\"
-DIDENT_USE
R_ID=\"User\" -DIDENT_HOSTNAME=\"LENOVO-F238501F\"
-DIDENT_USER_HASH=0xa90f30ddL
-DIDENT_UNIX_TIME=0x480d68eeL -DIDENT_UID_HASH=0x4077e9c8L
-fnesc-dump=wiring -
fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
comp
onents)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2434 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-0
TOS_NODE_ID=0 Ac
tiveMessageAddressC$addr=0
Could not find data section in build/iris/main.exe, aborting.
make: *** [setid] Error 255
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
}
I tried several permutations of the install, reinstall commands.
make iris install,0 mib510,COM5 (. instead of the .)
and nodeid 42 ( nodeid other than 0)
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/Blink
$ make iris reinstall,42 mib510,COM5
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-42
TOS_NODE_ID=42
ActiveMessageAddressC$addr=42
Could not find data section in build/iris/main.exe, aborting.
make: *** [setid] Error 255
Where am i going wrong ?
I am really desperate, as i am a grad student working on a course project,
which is due in 2 days
Any suggestions/ideas/workarounds /hacks welcome
Thanks a ton all of you,
Eagerly looking forward to your responses
cheers
ashish
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
