You will get "no response from the base station" message when there is no heartbeat messages heard from the base node. It might have to do with the FTDI USB drivers or intermittent power from your PC's USB port to MIB520 board (Not all PC USB ports are capable of providing enough current to MIB520). Couple of things to try: - Try latest version of MoteView (2.0.F) http://www.xbow.com/Support/wSoftwareDownloads.aspx - Uninstall/reinstall MIB520 drivers - Try a different USB port or PC. Good luck, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Brady Sent: Tuesday, April 22, 2008 5:16 AM To: tinyos-help Subject: [Tinyos-help] Base Station connection problems hi guys, I have a problem with my base station(MIB520) connection. I'm using MoteView 1.4 and MoteConfig to program my motes. When using MoteConfig, under the remote program tab, I'm clicking search and the base station picks up any nodes i have. Everything goes well and then after a couple of minutes I get a message: There is no response from the base station.Please check your connections and click Search again. Unplugging the base station and restarting MoteView fixes it for another couple of minutes and then it looses its connection again. Has anyone had a similar problem or have any idea what might be going wrong. Thanks, Pat Brady.
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
