Hello Janos Sallai : thank you very much for your reply !! i have tried it , it is the result as you say .
2008/4/25, Janos Sallai <[EMAIL PROTECTED]>: > > Jiwen: > > > > If you're compiling an application that does not make use of active > messages, there's going to be no ActiveMessageAddressC$addr symbol in the > binary. For example, this is the case with Blink, and this is the expected > behavior of tos-set-symbols. > > > > Janos > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *jiwen zhang > *Sent:* Friday, April 25, 2008 3:37 AM > *To:* tinyos-help > *Subject:* [Tinyos-help] a strange problem while compile > > > > Hello all : > > when i install the app blink to mote , there is a problem : > > > > *tos-set-symbols build/mica2/main.srec build/mica2/main.srec.out-10 > TOS_NODE_ID=10 ActiveMessageAddressC$addr=10** > Could not find symbol ActiveMessageAddressC$addr in build/mica2/main.exe, > ignoring symbol. > Could not find symbol TOS_NODE_ID in build/mica2/main.exe, ignoring > symbol. > installing mica2 binary using mib510 > uisp -dprog=mib510 -dserial=/dev/ttyS0 --wr_fuse_h=0xd9 -dpart=ATmega128 > --wr_fuse_e=ff --erase --upload if=build/mica2/main.srec.out-10 > Atmel AVR ATmega128 is found. > Uploading: flash > Firmware Version: 2.1* > > *Fuse High Byte set to 0xd9* > > *Fuse Extended Byte set to 0xff** > rm -f build/mica2/main.exe.out-10 build/mica2/main.srec.out-10* > > it can't set the node id . what is wrong ? i am using tinyos2.x . > > thank you !! >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
