On May 30, 2008, at 1:22 PM, Dima Kogan wrote: > I can confirm this. My CC1000-based motes work fine with the 2.0.2 > release but crash with the latest cvs. I run a modified BlinkToRadio > to test, with one node only transmitting and the other node only > receiving. The transmitting node works ok. The receiving node seems > to crash. As a test, I turn on an LED in Boot.booted() and don't > turn it off in any part of the code. This LED blinks or turns off at > various times on the transmitted node, which indicates that the mote > is > rebooting. ALso, the first packet from the transmitter is always > received properly, with the erroneous behavior starting with the > second > packet.
There have only been a few small changes to the CC1000 stack; the first was that it actually checks for CRCs, the second was the inclusion of support for 4 bit link estimation. Om, you were going to run some tests on mica2dots, right? Can you see if you encounter this problem? Phil _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
