HI Sir, I am a beginner in this micaz and mda320 devices. So far, i have acquired 4 micaz motes and 4 mda320 platform from my supervisor. Now, my task is to setup a WSN, where each of the motes will take data for different readings and different places, and whicn be setup easily.
I have done the first part by just connecting sensor to AD0 port, and the reading of the data will be displayed in VOLTAGE in Moteview. I have done some conversion of the reading through formula provided by the sensor vendors. Next, my project critical part is this. I have to program the motes so tat one of the mote, which connects to the mda320, will do counter purpose. Let say, i connect a rain gauge to that platform, so for every 10 drops of rain, the MDA320 will count the number of rain drops. So, let say my Mote 2 to Mote 4 are taking data for the temperature at an interval of 30 minutes, after 10 drops of rain, the Motes will reduce the interval time to 20 minutes in data recording. When there are even more frequent of rain drops, the interval time for Mote 2 to Mote 4 will change to 10 minutes of interval time to take reading. How can i achieve this objective? Can i use Motework in WIndow XP? How can i edit the binary files using TinyOS? Can sir lead me to this in a step-by-step manner? i would appreciate it a lot. Best Regards, David Chong Petronas University of Technology Malaysia
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
