Not sure about the protocol settings but the MSP manual should describe everything you can do with the UART. The outputs are logic level: 0-3v not RS232. TTL levels are 0-5v but usually active low so it'll probably match up.
MS baris tas wrote: > Hi all, > > I need to configure my tmote sky to 57600 baud, No Parity, 8 databits > and 1 stop bit. Baud rate part is OK, but how about the others? Also, I > need the UART0 to be TTL levels. Is the default TTL or RS232 levels for > tmote? If it is RS232, what should I do to convert it to TTL levels? > > I searched the archive but couldn't find enough information. I'm really > struggling with this, and I can't find support on the internet about > this stuff. > > Any help, comment will make me really happy. > > Thanks > > Baris > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
