Oh, I forgot to tell, I am using TinyOS 2.x (T2) from the CVS. My last update was about a month ago.
~Dimas~ On Wed, Jun 18, 2008 at 3:20 PM, Dimas Abreu Dutra <[EMAIL PROTECTED]> wrote: > Eric, > > I'm not positive it isn't the hardware, but I am POSITIVE I have the > voltage that should return around 0x0916 adc counts. I also have run this on > two different motes (both invent) and noticed the same thing on adaptations > that Urs Hunkeler did of the original tmote invent drivers. > > It can be some hardware feature (capacitor transients, etc) but if it was, > the ADC drivers should start it on the boot sequence, so the first readings > would not be erroneous. I can solve this on my own, with a dummy reading > just to clear that, but it wouldn't be a very elegant solution and this can > be a problem to more people on the future. I did read some of the msp430 > datasheet, but there is too much detail and complicated state machines, and > the code of the msp adc modules are very complicated too. I can inspect > more, but I think that maybe it should be clearer for people who had more > hands-on contact with the adc. > > ~Dimas~ > > > On Wed, Jun 18, 2008 at 1:55 PM, Eric Keller <[EMAIL PROTECTED]> wrote: > >> Are you positive it isn't hardware? What version of TinyOS are you >> running? >> Eric >> >> >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
