clarify "the number of interfaces used". I'd be more inclined to suspect some small logic error introduce.
HTH, Paul On Thu, Jun 26, 2008 at 5:46 AM, Sander <[EMAIL PROTECTED]> wrote: > Hello everyone, > > > > I ran into a strange problem with my software which to me seems to be caused > by the number of used interfaces. I'm currently using tinyos1 because > tinyos2 seems to be to slow in sampling the adc channels. Anyhow my software > was running without any big problems, but I needed some extra radio > interfaces to try to fix a bug that caused my motes to hang. I didn't need > to change much in my code but strangely now the start of my program isn't > working anymore. All code until this point was unchanged compared to the > previews working version. Let me paint a picture of this new bug. I > broadcast a message from one mote to two receiving motes running the same > code with the same interface only the address is different to distinguish > them in the network. Now the message is only received by one mote and it's > the same one every time. The other mote is not receiving anything and the > mote that did receive the message does only that and hangs afterward. So > when I remove the extra code needed for these radio interfaces including the > interfaces themselves everything works and both motes are receiving the > message. > > > > To me it seems like I might be using to many interfaces, I count 21. Can > anyone tell me if this is the case or what other cause there could be? > > > > Thanks > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
