Hi All, Can you please help me out with the solution for the below issue. I am looking for a way
1) to compile the program on machine - machine1 2) copy the build folder generated to another machine - machine 2 3) reinstall the build folder to the micaz mote connected to the latter machine (machine 2) through a MIB520 gateway. The third step is the problem. Please note that the code works fine on machine 1. It is only the portability of the code that is causing problem. Let me know if you have faced an issue before in doing this. I am getting the "*** No rule to make target `micaz'." Please let me know the solution, Thanks, Amrit **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
