Hi Romain and Varun!

I can confirm that (Test)Tymo works (at least) with 2 motes and 3 motes 
(multihop).

But there are other surprises, I'll describe detailed later. Briefly 
there seems to be a problem with removing after timeout old routes. The 
bad thing: this occurs only on motes not in TOSSIM. So I try to decide 
what data I could and should collect to post here that can help to 
investigate this issue.

Regards,
Andrey



Romain Thouvenin wrote:
> On Mon, Jul 14, 2008 at 4:22 AM, Varun Jain <[EMAIL PROTECTED]> wrote:
>> Hi,
>>
>> I am trying to run the TestTymo application. I have programmed two nodes
>> with nodeId 1 and 3. I have a Push button on my motes so I have modified the
>> application such that I send a packet from the 'Origin' only when an event
>> (in this case Pushbutton) is generated. On the 'target' end, I make an LED
>> toggle when the packet is received correctly and it works but I want to
>> check Multihop behavior of Tymo now. So I programmed another mote with
>> nodeID = 7. I kept the 'target node (3) ' out of range of the ORIGIN (1).
>> Now, I kept node-7 such that it is in range of other two motes. But there is
>> no multihop communication taking place whereas due to the Intercept
>> interface defined in "TestTymo" application, it should hop from 1 to 7(which
>> it should forward) and then to 3 but it is not.
>>
>> Has someone encountered with this problem??
>>
> 
> Hello,
> 
> Do you toggle a LED on the intermediate node to check that it
> receives/forwards something?
> Anyway, I just tried in TOSSIM to set a 4-node network like this one:
> 1 -- 3
> |     |
> 4 -- 2
> 
> and it worked fine. Unfortunately I don't have motes to compare with
> the real-world behaviour.
> 
> Romain
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> 
> 

_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to