In MoteWorks, the RF power can be specified at compile time using a variable called "RADIO_POWER" in MakeXbowlocal file (several pre-defined values exist). I would think that a similar option exists under TinyOS. Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wang wei Sent: Tuesday, July 22, 2008 8:33 AM To: [email protected] Subject: Re: [Tinyos-help] the value of PA_POW sorry, the correct question should be how to change the values of RF outputs in the address 0x0B On Tue, Jul 22, 2008 at 8:30 AM, wang wei <[EMAIL PROTECTED]> wrote: hi all in the crossbow user manual its said "The radio on the MICA2 can be adjusted for a range of output power levels. The register in the radio that controls the RF power level is designated PA_POW at address 0x0B, and the values and their corresponding RF outputs are provided on Table 2-2 below." who knows how to change the value of PA_POW? thanks Vi
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
