Having problems installing Blink on IRIS with MIB520. Followed
installation tutorial for Mac OS X:
http://docs.tinyos.net/index.php/Installing_tinyos-2.x_on_Mac_OS_X_%28Tiger_%26_Leopard%29#Installing_avr_tools_for_Mica_Support
Do I need to install something else for IRIS support?
Using command: make iris install mib520,/dev/tty.usbserial-XBR3EDJYB
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfile=build/iris/app.c -board=micasb -
DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 -
DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"jcarneiro\" -
DIDENT_HOSTNAME=\"MacBookPro.loca\" -DIDENT_USERHASH=0x687a91fbL -
DIDENT_TIMESTAMP=0x4891e802L -DIDENT_UIDHASH=0x4e04f3e7L -fnesc-
dump=wiring -fnesc-dump='interfaces(!abstract())' -fnesc-
dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/
iris/wiring-check.xml BlinkAppC.nc -lm
<command-line>: warning: "__STDC__" redefined
/tmp/nesccppb9b404Y:70:1: warning: this is the location of the
previous definition
compiled BlinkAppC to build/iris/main.exe
2308 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/
main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/
main.ihex
writing TOS image
cp build/iris/main.srec build/iris/main.srec.out
installing iris binary using mib510
avrdude -cmib510 -P/dev/tty.usbserial-XBR3EDJYB -U hfuse:w:0xd9:m -
pm1281 -U efuse:w:0xff:m -C/etc/avrdude/avrdude.conf -U flash:w:build/
iris/main.srec.out:a
make: avrdude: Command not found
make: *** [program] Error 127
Regards,
Joao
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
