Everything is (im)possible with software... I would go look at how that sensor is used on the telsob/tmote platform and try to steal as much as possible. You may need to invent some software-timer bit-bang to get it to talk, or you might be able to use the second atmega serial port if you can arbitrate with the radio.
MS Davide wrote: > Hi, > > Is it possible to configure the GPIO bus in the micaz mote to interface > it with the Sensirion > SHT11(http://www.sensirion.com/en/01_humidity_sensors/02_humidity_sensor_sht11.htm) > > that have a 2 line communication port like (but not the same as) I2C. > wich pins of the 51-pin connector can be used and how > > thanks in advance > > Davide > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
