TosCheck Completes without errors and rpm -qa gives the following output I am Narendra and presently i am working with Mica2 motes that came in the professional kit from crossbow. I am novice with using tinyos but i know it is installed correctly as toscheck completes without errors. I want to compile and build the s-mac stack 1.2 in these motes as a part of my project. I have Mib520 programming board with six mts400 mica2 nodes I am not able to load any application (not even blink) in the motes. in the blink directory $ make mica2 completes with no errors and it says writing TOS image at the end com ports 13 and 14 have been allocated by the system for the USB cable TosCheck Completes without errors and $ rpm -qa gives the following output avr-binutils-2.13.2.1-1w avr-gcc-3.3tinyos-1w avr-insight-pre6.0cvs.tinyos-1w tinyos-tools-1.1.0-1 task-tinydb-1.1.3July2004cvs-1 tinyos_contrib-1.13Mar2005cvs-1 mspgcc-win32tinyos-20041204-2 avr-libc-20030512cvs-1w avarice-2.0.20030825cvs-1w nesc-1.1.2-1 tinyos-1.1.11Feb2005cvs-3 mate-asvm-2.2.1-1 $ make mica2 install mib520,com13 ends up giving flash error at adress..... error. i have read various tinyos helps but being novice at TINYOS i am not able to solve the problem. Please help me to get around this problem. I know i might be sounding very silly in asking such little problems. Thanks in advance Reagrds, Narendra Naukwal La Trobe University
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
