Hello Joao, This is most likely a hardware problem with this specific IRIS Mote. I suggest that you return the faulty unit back to Crossbow for repair/replacement. You will need to obtain an RMA# prior to return by contacting [EMAIL PROTECTED]
Regards, Giri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of João Paulo Amaro da Costa Luz Carneiro Sent: Tuesday, August 26, 2008 5:16 AM To: [email protected] Subject: [Tinyos-help] Iris not running on batteries Hi, I have mote which only works when connected to the mib520. I installed blink on it and the lights blink correctly when connected to the mib520 but when I take it off the programming board and switch it on nothing happens. I don't have problems with other iris motes running the same programs. Has anyone experienced this problem? I believe it is a hardware problem and need to return it to crossbow, is this correct? I've found a similar case in the mailinglist archives with a micaz. Best regards, Joao _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
