Hi,
I am using the TinyOS and Tmote Sky to collect data from a vibratab. I
installed the nesC code to the Tmote Sky. But the data collected is very
strange. When the vibratab is not vibrating, if I set the sample period as
256ms, the amplitude of the PC oscilloscope is below 100 while if the sample
period is 20ms, the data becomes around 1200. Besides, even if I remove the
vibratab so that there is nothing input to the ADC12, the amplitude shown is
still about 800. Is it the software or the hardware that cause the problem? The
vibratab is in well performance and the code is the original code. How can I
solve the problem?
Thank you very much!
Best wishes,
Chenni
_________________________________________________________________
快来看看这些猫咪有多逗，爆笑！
http://cnweb.search.live.com/video/results.aspx?q=%E5%8F%AF%E7%88%B1%E7%8C%AB%E5%92%AA&Form=MEVHAA
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
