"-dprog=dapa" indicates that the programmer type is not being set correctly. Search this list for my frequent advice on using DEFAULT_PROGRAM in the makefile. Also I think you need to use MIB510 instead of 520 because something isn't implemented someplace...
MS nartessos nartessos wrote: > > Good morning > > Now I am on tinyos 2.0.2, I am using mib520 (usb interface) and micaz > motes. > When I try to program my mote with blink apps (make micaz reinstall > mib520,/dev/ttyS0) > I have the following error : > > mkdir -p build/micaz > compiling BlinkAppC to a micaz binary > ncc -o build/micaz/main.exe -Os -finline-limit=100000 -Wall -Wshadow > -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb > -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"soane\" > -DIDENT_HOSTNAME=\"Cancoon\" -DIDENT_USERHASH=0x5ed782a6L > -DIDENT_TIMESTAMP=0x48c53e7aL -DIDENT_UIDHASH=0xa13f87e2L > -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' > -fnesc-dump='referenced(interfacedefs, components)' > -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm > compiled BlinkAppC to build/micaz/main.exe > 6960 bytes in ROM > 51 bytes in RAM > avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec > avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex > writing TOS image > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary with dapa > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase > pulse > Atmel AVR ATmega128 is found. > Erasing device ... > pulse > Reinitializing device > Atmel AVR ATmega128 is found. > > Fuse High Byte set to 0xd9 > > Fuse Extended Byte set to 0xff > sleep 1 > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff > --upload if=build/micaz/main.srec.out > pulse > Atmel AVR ATmega128 is found. > Uploading: flash > > Fuse High Byte set to 0xd9 > > Fuse Extended Byte set to 0xff > sleep 1 > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff > --verify if=build/micaz/main.srec.out > pulse > Atmel AVR ATmega128 is found. > Verifying: flash > flash error at address 0x0: file=0x0c, mem=0xff > flash error at address 0x1: file=0x94, mem=0xff > flash error at address 0x2: file=0x49, mem=0xff > flash error at address 0x3: file=0x00, mem=0xff > flash error at address 0x4: file=0x0c, mem=0xff > flash error at address 0x5: file=0x94, mem=0xff > flash error at address 0x6: file=0x68, mem=0xff > flash error at address 0x7: file=0x00, mem=0xff > flash error at address 0x8: file=0x0c, mem=0xff > flash error at address 0x9: file=0x94, mem=0xff > flash error at address 0xa: file=0x68, mem=0xff > flash error at address 0xb: file=0x00, mem=0xff > flash error at address 0xc: file=0x0c, mem=0xff > flash error at address 0xd: file=0x94, mem=0xff > flash error at address 0xe: file=0x68, mem=0xff > flash error at address 0xf: file=0x00, mem=0xff > flash error at address 0x10: file=0x0c, mem=0xff > flash error at address 0x11: file=0x94, mem=0xff > flash error at address 0x12: file=0x68, mem=0xff > flash error at address 0x13: file=0x00, mem=0xff > flash error at address 0x14: file=0x0c, mem=0xff > flash error at address 0x15: file=0x94, mem=0xff > flash error at address 0x16: file=0x68, mem=0xff > flash error at address 0x17: file=0x00, mem=0xff > flash error at address 0x18: file=0x0c, mem=0xff > flash error at address 0x19: file=0x94, mem=0xff > ................ > > I see different answer for this problem but nothing resolve it : > > - verify if the mote is strongly fix to the mib520 board > - mib520 is not take in charge by tinyos ( replace mib520,/dev/ttyS0 by > mib510,/dev/ttyS0) > - erase the sensor : uisp -dprog=dapa --erase > - sensors are not programmed correctly by the constructor, I don't if it > is ; I saw that > to know it I have to buy some JTAG program?? > > > does someone can help me? > > thanks > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
