Axl, I assume that you've attempted turning off all optimizations, i.e. your make command line is something like this: CFLAGS+="-O0 -g2 -ggdb -fnesc-no-inline" make iris
What avr-gcc version do you use? What JTAG hardware do you use? Janos -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Axl Schreiber Sent: Friday, September 12, 2008 9:58 AM To: [email protected] Subject: [Tinyos-help] Problem, using avarice/avr-insight on IRIS motes Hi all, I am facing a strange problem using avr-insight on IRIS motes. I have tested avarice 2.7/2.8, avr-insight 6.4 debugging the Blink application of Tinyos-2.x on IRIS motes. I set breakpoints at call Leds.led0Toggle(), call Leds.ledToggle1() and call Leds.led2Toggle(). The program stops at the first breakpoint "call Leds.led0Toggle()" only. The other two breakpoits were never reached. If I use one breakpoint only, it works like expected. If I use MICAz motes to test avarice/avr-insight, all three breakpoints were reached. It looks like avarice/avr-insight can handle only one breakpoint on IRIS motes. Has anybody the same problem? Any hints and/or suggestion to solve the problem? Axl _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.20/1666 - Release Date: 9/11/2008 6:55 PM _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
