I am supposing that your are using Linux and MIB-520: use the command dmesg when you plug and unplug the MIB-520; you will see the messages related to the "serial ports" ttyUSBX and ttyUSBY (the smaller, in general, is for programming, and the other is for debugging purposes).
Examples: make mica2 install mib510,/dev/ttyUSB0 make mica2 install mib510,/dev/ttyUSB2 []s, Agnelo Rocha da Silva Research Assistant - Wireless Sensors Network Laboratory PhD Candidate in Computer Engineering University of Nebraska-Lincoln (UNL) 2008/9/16 milos rovcanin <[EMAIL PROTECTED]> > > Ok,i have a problem! I am using an usb to serial port converter because my > laptop doesn't have a serial port. Now, my installer can't see the > programming board! I know what is the problem but i don't know how to fix > it. > > I used to call :make mica2 install mib510,/dev/ttyS0 > S0 - serial port ID > > Now I need USB port ID,right? What is it? > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
