I need help. I am making c# application which need to send the packet to mote. I dont wanna use tinyos toolchain in this case. On the mote, a simple application has been written, leds will toggle each time event UartReceive.Receive is occurred. So, I send this packet through serial port: 0x7E - Frame delimiter 0x44 - Protocol byte (68): SerialP 0x26 - Sequence number byte: SerialP 0x00 - Packet format dispatch byte: SerialDispatcherC 0xFF - Destination address 0xFF - Destination Address 0xFF - Source Address 0xFF - Source address 0x0B - Message Length (11, length of the payload) 0x70 - GroupID (set on the node as well to this value) 0x06 - Active Message Handler ID 0x01 0x00 0x02 0x12 0x34 0x56 0x00 0x12 0x45 0x56 0x00 - Payload 0xDE 0x25 - CRC (well calculated) 0x7E - Frame Delimiter
Pls, dont refer me to TinyOS tutorial, since it doesn't show actual byte stream, and it is anyway quite faulty, since simple adding of source address (as some ppl suggested) is not the only problem. This problem bugs me for a long time now, and pls, if someone know, I would really appreciate if you tell me. Also, if the above byte stream not correct, pls give me the packet format example that works for sure. Thanks a lot in advance! Regards, Aleksandar _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
