I figured that it had something to do with deputy. Should I have it, is it
needed
in my .platform file (the mm3 one).
eric
On Tue, Sep 23, 2008 at 6:29 PM, Yang Chen <[EMAIL PROTECTED]> wrote:
> CIL_MACHINE defines machine-dependent datatype information which is used by
> deputy/cil.
>
> Eric Decker wrote:
>
>> In the telosb include file, there is some ENV{CIL_MACHINE}. I copied this
>> over to the mm3 platform .platform file without success. Same behaviour.
>>
>> eric
>>
>> On Tue, Sep 23, 2008 at 5:25 PM, Kevin Klues <[EMAIL PROTECTED] <mailto:
>> [EMAIL PROTECTED]>> wrote:
>>
>> I noticed a bunch of new stuff at the bottom of the .platform file for
>> telosb. Not sure if this is related or not....
>>
>> Kevin
>>
>> On Tue, Sep 23, 2008 at 11:34 AM, Eric Decker <[EMAIL PROTECTED]
>> <mailto:[EMAIL PROTECTED]>> wrote:
>> > Hi,
>>
>>
>>
>>
>> >
>> > I have a custom platform that is similar to the telosb and would
>> like to
>> > start using
>> > safe TinyOS/Deputy. When I do a build normally I type "make
>> debugopt mm3
>> > threads"
>> > and it builds fine. I try to build safe using
>> >
>> > "make debugopt mm3 threads safe"
>> >
>> > and it does the same thing as the former. I've
>> > looked at what is getting included and there isn't any change.
>> >
>> > When I've built other applications for the telosb using safe I
>> notice that
>> > "/usr/lib/ncc/deputy_stage1.h"
>> > gets pulled in. While when I try to build my stuff it is always
>> using
>> > "/usr/lib/ncc/deputy_nodeputy.h"
>> > even if I have "safe" included on the command line.
>> >
>> > I notice that the nesc1 command line is: (seen via verbose)
>> >
>> > This is from a "make verbose mm3 threads safe"
>> >
>> > Note in particular the "-fnesc-include=deputy_nodeputy"
>> >
>> > nesc1 -fnesc-include=deputy_nodeputy -_fnesc-gcc=msp430-gcc
>> > -_fnesc-include=nesc_nx -_fnesc-include=tos
>> > -_fnesc-scheduler=TinyTaskSchedulerC,TinyTaskSched\
>> > ulerC.TaskBasic,TaskBasic,TaskBasic,runTask,postTask -_Wnesc-all
>> > -_fnesc-target=msp430 -_fnesc-no-debug -mdisable-hwmul
>> -mmcu=msp430x1611
>> > -DPLATFORM_MM3 -\
>> > DBOARD_ -DTEST_GPS -DENABLE_ERASE -DFAKE_SURFACE -DTRACE
>> > -DDEFINED_TOS_AM_GROUP=0x22 -DTHREADS -DIDENT_APPNAME="mm3AppC"
>> > -DIDENT_USERNAME="cire" -DIDENT_H\
>> > OSTNAME="zot" -DIDENT_USERHASH=0x11dce1bdL
>> -DIDENT_TIMESTAMP=0x48d935d7L
>> > -DIDENT_UIDHASH=0x822daf31L -DNESC=130 -I/usr/lib/ncc
>> > -I/home/cire/mm_t2/t2_mm3/t\
>> > os/platforms/mm3 -I/home/cire/mm_t2/t2_mm3/tos/system
>> > -I/home/cire/mm_t2/t2_mm3/tos/interfaces
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/lib/tosthreads/chi\
>> > ps/msp430
>> -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/lib/tosthreads/system
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/lib/tosthreads/interfaces
>> > -I/home/cire/m\
>> > m_t2/t2_cur/tinyos-2.x/tos/lib/tosthreads/types
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/sensorboards/
>> > -I/home/cire/mm_t2/t2_mm3/tos/platforms/mm3 -I/home\
>> > /cire/mm_t2/t2_mm3/tos/platforms/mm3/misc
>> > -I/home/cire/mm_t2/t2_mm3/tos/platforms/mm3/sensors
>> > -I/home/cire/mm_t2/t2_mm3/tos/platforms/mm3/../../chips/msp4\
>> > 30/timer
>> >
>>
>> -I/home/cire/mm_t2/t2_mm3/tos/platforms/mm3/../../../support/utils/include
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/chips/cc2420
>> -I/home/cire/mm_\
>> > t2/t2_cur/tinyos-2.x/tos/chips/msp430
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/chips/msp430/pins
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/chips/msp430/tim\
>> > er -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/chips/msp430/usart
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/chips/msp430/dma
>> > -I/home/cire/mm_t2/t2_cur/tinyos-\
>> > 2.x/tos/lib/timer
>> -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/lib/serial
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/lib/power
>> > -I/home/cire/mm_t2/t2_cur/tinyos-\
>> > 2.x/tos/interfaces -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/types
>> > -I/home/cire/mm_t2/t2_cur/tinyos-2.x/tos/system -Wall -Wshadow -v
>> mm3AppC.nc
>> > -o build/mm\
>> > 3/app.c
>> >
>> >
>> > Could some one help me figure out what needs to tweaked?
>> >
>> > eric
>> >
>> > --
>> > Eric B. Decker
>> > Senior (over 50 :-) Researcher
>> > Autonomous Systems Lab
>> > Jack Baskin School of Engineering
>> > UCSC
>> >
>> >
>> > _______________________________________________
>> > Tinyos-help mailing list
>> > [email protected]
>> <mailto:[email protected]>
>> >
>>
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>> >
>>
>>
>>
>> --
>> ~Kevin
>>
>>
>>
>>
>> --
>> Eric B. Decker
>> Senior (over 50 :-) Researcher
>> Autonomous Systems Lab
>> Jack Baskin School of Engineering
>> UCSC
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> [email protected]
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
>
--
Eric B. Decker
Senior (over 50 :-) Researcher
Autonomous Systems Lab
Jack Baskin School of Engineering
UCSC
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
