Hi, I'm following the instruction contained in the README<http://smote.cs.berkeley.edu:8000/tracenv/browser/code/b6lowpan/trunk/README>file of the b6lowpan stack. When I give the command "sudo ./serial_tun /dev/ttyUSB0 telosb", I get the following output with an error of address configuration. The Output is reported below: 11:49:54.892278: INFO: created tunnel device: tun0 ifconfig tun0 up ifconfig tun0 mtu 1280 ifconfig tun0 inet6 add 2001:470:1f04:56d:000:000:000:064/64 ifconfig tun0 inet6 add fe80::064/64 11:49:54.932662: INFO: send me SIGUSR1 to dump the topology to a 'nwgraph.dot' in the cwd 11:49:54.932939: INFO: send me SIGUSR2 to recompute and print source routes to every router Note: sync 11:49:54.989159: INFO: config error: 0x0 addr: 0x64
I Don't know where I made mistakes. My opinion is that I do not configure well the "serial_tun.config". I have tried several configuration but it does not work. Anyone can help me? thanks in advance, alessandro ludovici
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
