Hi, thanks for the fast reply.
> Try adding some LED command to the RF230PacketP.nc file (you need to > change the wiring to do that), and verify that the initRadio() is Ok, I've done that. Unfortunately, I can't check that until tomorrow, as no hardware is currently available. :( > called on your setup. The RF230 chip draws a lot of power and it need > to be put into sleep mode at startup. This is done through the > PlatformInit and SoftwareInit interfaces. Just in case initRadio (in RF230PacketP.nc) is not called. What do I have to do then? When are the init() commands of the above mentioned interfaces called? Is that done automatically? Thanks in advance again, Christian _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
