Hi! On Wed, 10 Sep 2008, [EMAIL PROTECTED] wrote:
> Hello, > > I am having trouble to load deluge into my Mica2 motes. The mote that I have > is MIB510. > I am using Cygwin with USB port (COM5). > I got the no such file or directory error when I make&load the program into > the mote. > ====================================== >> make mica2 reinstall,19 mib510,COM5 > set-mote-id build/mica2/main.srec build/mica2/main.srec.out-19 19 > installing mica2 binary using mib510 > uisp -dprog-mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd8 -dpart=ATmega128 > --wr_fuse_e=ff > --erase --upload if=build/mica2/main.srec.out-19 > Error: No such file or directory > -> /dev/ttyS3 > make: *** [program] Error 1 > ====================================== > > The following is my Makelocal file under /opt/tinyos-1.x/tools/make > ====================================== > DEFAULT_PROGRAM=mib510 > MIB510=/dev/ttyS3 > > DEFAULT_LOCAL_GROUP=0x88 > > CFLAGS > += -I%T/../contrib/xbow/tos/platform/mica2 > -I%T/../contrib/xbow/tos/AXStack/mica2 > -DCC1K_DEFAULT_FREQ=0x15 -DRADIO_XMIT_POWER=0xFF > ======================================= > > If I change the MIB510=/dev/ttyS3 to MIB510=COM5 in Makelocal file, the > compile process seems hang forever at the following line: > ======================================== > ... > ... > uisp -dprog=mib510 -dserial=COM5 --wr_fuse_h=0xd8 -dpart=ATmega128 > --wr_fuse_e=ff > --erase --upload if=build/mica2/main.srec.out-19 > ======================================== > > Please help me fix this issue! Your response is appreciated! Can you try to use /dev/ttyS4 instead of COM5? The numbers for ttyS is one less than the one from the COM. :P -- Razvan ME _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
