The driver should be included in kernel 2.6.16. Check dmesg before and after connecting the programming board to see if the driver module has been loaded. If yes, you should be able to see and use /dev/ttyUSB0 and /dev/ttyUSB1.
Janos 2008/11/5 guoyuehua.cool <[EMAIL PROTECTED]> > > hi: > > firstly,thanks for your reply.as the > http://www.ftdichip.com/Drivers/VCP.htm website,i has downloaded the > linux version of Virtual COM port (VCP) drivers.when i execute "make" for > generating the module.the error is as following: > error: /lib/modules/2.6.16/build/include/linux/modversions.h: No such > file or directory. > > i guess my kernel version is wrong.In the readme said"it is adapted > from the 2.4.32 kernel to support both the 2232c and 232r chip".but the > 2.4.32 do not support ipv6.In my project,the kernel must support it. > our programming board is mib520cb,i do not know which FT** chip can > match our programming board.so which kernel version i can use for installing > vcp drivers.thanks in advance. i know that my problem is a littele confusion > and stupid.but it is very important for me.has anybody installed the > mib520cb 's driver ? > best wishes:) > > jackg > > 2008,11,5 > > > ------------------------------ > [广告] 凯旋珠联"利"合分期付款优惠活动进行中 <http://popme.163.com/link/005035_1104_9002.html> > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
