You could send serial messages from pc to mote. I don't remember but I think the oscilloscope example has something like this to update the sensing rate.
Regards, Joao On 2008/11/05, at 15:41, Eric Keller wrote: > If I was going to do that, I'd look at the printf library. Of > course, it > sends data the other way, but it's a good start. > On the other hand, it makes much more sense to control the motes > over the radio. > Eric > > > On Wed, Nov 5, 2008 at 8:36 AM, Dinesh Koya > <[EMAIL PROTECTED]> wrote: >> Hi all >> >> I am doing a project in which I have a requirement to control tmotes >> (connected to the USB ports of the PC) from the PC like switching >> ON/OFF their radios, changing the timer's firing periods,etc. I would >> like to know if there is some sample program in Tinyos to control the >> sensor nodes from the PC, if not then could someone tell me how to do >> it. I am using TINYOS 2.0.2 >> >> Thanks for any help >> >> Regards >> Dinesh >> ________________________________ >> Add more friends to your messenger and enjoy! Invite them now. >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
