Thanks for the quick replies. Well, I rebooted the system for some other reason and it seem to have done the trick. Now, I am able to program with MIB510 programmer with KeySpan USA -19HS usb to serial adapter cable.
Thanks! Vinai. On Thu, Nov 6, 2008 at 2:14 PM, Janos Sallai <[EMAIL PROTECTED]>wrote: > Do you see any drivers loading after you plug in the usb-to-serial > converter (type dmesg before and after plugging it in and compare the > outputs)? Is /dev/ttyUSB0 created? Does "make mica2 install.1 > mib510,/dev/ttyUSB0" work? > > Janos > > On Thu, Nov 6, 2008 at 12:39 PM, Vinai Sundaram <[EMAIL PROTECTED]>wrote: > >> Hi , >> >> I have Xubuntos installed on my machine and I boot into it. I am able to >> program telosb motes with it. However, I am unable to program mica2 motes >> with MIB510 programmer as my usb to serial cable is not detected by motelist >> command. When I program the motes, I get "flash address ...not found error". >> I tried RadioShack's gigawire as well as Keyspan's USA-19HS usb to serial >> adapter cable. These cables come with a driver for windows but not linux >> (ubuntu). I am wondering if someone is aware of Xubuntos usb to serial >> driver. Thanks. >> >> Vinai >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
