Re: [Tinyos-help] Unable to install Blink application to irismote using MIB520 contoller and tiny os 2.x

Mon, 08 Dec 2008 19:56:10 -0800 

I'm pretty sure its an Iris mote.
I tried installing tinyos1.x using the windows installer - but I get flash errors. In addition, it appears that I can't compile directly for iris. The only options I am allowed is mica, mica2 and mica2dot. I dont understand why I can't compile for micaz or iris. Furthermore, the installer doesn't provide files for the intelmote2 either! Do you know where I can find complete instructions for installation to compile on iris and intelimote2? My Iris mote is directly connected to the MIB520CA board, and from there to the computer. Do yout think I need to connect it to any other boards too? 
Thanks

Rahul




----------------------------------------------------------------------

Message: 1
Date: Sun, 7 Dec 2008 14:08:19 -0600
From: "Janos Sallai" <[EMAIL PROTECTED]>
Subject: Re: [Tinyos-help] Unable to install Blink application to
        irismote        using MIB520 contoller and tiny os 2.x
To: "Rahul Iyer" <[EMAIL PROTECTED]>,   "tinyos help"
        <[email protected]>
Message-ID:
        <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1

Rahul,

Please make sure that
1. the mote is properly mounted on the programming board
2. that your mote is indeed an iris (this may sounds stupid, but this
has happened before...)
3. that /dev/ttyUSB0 is really your mib520 (i.e. do any of the leds
blink when you're trying to program)

Janos
On Fri, Dec 5, 2008 at 11:57 PM, Rahul Iyer <[EMAIL PROTECTED]> wrote: 
Hi,
I am trying to compile and install the blink application for an irismote 
using MIB520 and tinyos-2.x
I can get the application to compile. But I can't get it to install. I am not sure what to do. Any suggestions? I have tried install.0, install.42 etc 
- I get the same output...

The output is below. Thanks,

Rahul


Compiling seems to work:
--------------------------------------------------------------------------------------------------------
$ make iris
mkdir -p build/iris
   compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all - target=iris -fnesc-cfile=build/iris/app.c -board=micasb - DDEFINED_TOS_AM_GROUP=0x22 
--param max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
-DIDENT_USERNAME=\"monday\" -DIDENT_HOSTNAME=\"Monday\"
-DIDENT_USERHASH=0x6fc7776cL -DIDENT_TIMESTAMP=0x493a0c69L
-DIDENT_UIDHASH=0x1df5c139L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc- dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm 
   compiled BlinkAppC to build/iris/main.exe
           2268 bytes in ROM
             51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/ main.srec avr-objcopy --output-target=ihex build/iris/main.exe build/iris/ main.ihex 
   writing TOS image




installation gives all sorts of strange messages
------------------------------------------------------------------------------------------------------------------------------

$ make iris install.0 mib520,/dev/ttyUSB0
mkdir -p build/iris
   compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all - target=iris -fnesc-cfile=build/iris/app.c -board=micasb - DDEFINED_TOS_AM_GROUP=0x22 
--param max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
-DIDENT_USERNAME=\"monday\" -DIDENT_HOSTNAME=\"Monday\"
-DIDENT_USERHASH=0x6fc7776cL -DIDENT_TIMESTAMP=0x493a0c84L
-DIDENT_UIDHASH=0x12371ebeL -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc- dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm 
   compiled BlinkAppC to build/iris/main.exe
           2268 bytes in ROM
             51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/ main.srec avr-objcopy --output-target=ihex build/iris/main.exe build/iris/ main.ihex 
   writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-0
TOS_NODE_ID=0 ActiveMessageAddressC$addr=0
Could not find data section in build/iris/main.exe, aborting.
Could not find symbol ActiveMessageAddressC$addr in build/iris/ main.exe, 
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/iris/main.exe, ignoring symbol. 
   installing iris binary using mib510
avrdude -cmib510 -P/dev/ttyUSB0 -U hfuse:w:0xd9:m -pm1281 -U efuse:w:0xff:m 
-C/etc/avrdude/avrdude.conf  -U flash:w:build/iris/main.srec.out-0:a

avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.05s 

avrdude: Device signature = 0xffffff
avrdude: Yikes!  Invalid device signature.
        Double check connections and try again, or use -F to override
        this check.


avrdude done.  Thank you.

make: *** [program] Error 1
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help






_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to