Hi! On Fri, 19 Dec 2008, Jamie Macbeth wrote:
> Hi, Razvan, > > I just did a simple test of the restoration of TOS_NODE_ID on the > iris. Now it seems to work properly! I think earlier I was using a > stale app image in which DelugeC wasn't properly wired in. Sorry for > troubling you. > > By the way, I was required to copy over the volumes-*.xml files in > order for the iris image to build with DelugeC wired in and with > "BOOTLOADER=tosboot" in the Makefile. It may be worthwhile to add > this to the instructions in the Deluge T2 Wiki or elsewhere. The "BOOTLOADER=tosboot" was already in the manual. I also added the instruction about volumes-*.xml. Thanks for catching this problem! :-) -- Razvan ME > DelugeC.nc doesn't build without the volumes-*.xml files, and that > caused me to attempt to disseminate images without it, which, I think, > in the end, caused my trouble with TOS_NODE_ID. > > Much thanks, > > Jamie > > > On Mon, Dec 15, 2008 at 4:08 PM, Razvan Musaloiu-E. <[email protected]> > wrote: > >>> The TOS_NODE_ID is hard-coded on the app.c but upon boot the DelugeC is >>> restoring it. The code that is doing this for IRIS is the Init.init from >>> tos/lib/net/Deluge/extra/iris/NetProgM.nc. I'll check tomorrow on MicaZ to >>> see if everything works as it should. >> >> I just tested MicaZ and it works fine. The TOS_NODE_ID is properly restored >> after a -dr command. Janos, can you confirm this result for IRIS? :-) >> >> -- >> Razvan ME >> > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
