Hi,
I was following the steps according to the Deluge T2 - Programming
Manual.
After executing the script for Xbow telosb mote:
./burn /dev/ttyUSB0 telosb
The *first step works fine* i.e. "At this point the first led (red) should
be blinking."
then *at the second step* -
msp430-objcopy --output-target=ihex build/telosb/main.exe
build/telosb/main.ihex
writing TOS image
=============================== Upload the image
===============================
Flushing the serial port...
Pinging node ...
*The script gets stuck at this point (Pinging node ...) indefinitely* (I
aborted after 10 minutes) and the serial data transfer led (small yellow
led) blinks continuously along with the first (red) led.
Same thing happens if I use another mote or another USB port.
*The trace when I aborted the call *(of the burn script) is:
Pinging node ...
Traceback (most recent call last):
File "/usr/local/bin/tos-deluge", line 422, in <module>
inject(imgNum, sys.argv[5])
File "/usr/local/bin/tos-deluge", line 291, in inject
i = getIdent(imgNum)
File "/usr/local/bin/tos-deluge", line 251, in getIdent
r = read(imgNum, DELUGE_IDENT_OFFSET, DELUGE_IDENT_SIZE)
File "/usr/local/bin/tos-deluge", line 167, in read
if am.write(sreqpkt, FM_AMID):
File "/usr/local/bin/tos.py", line 353, in write
return self._s.write(ActiveMessage(packet, amid=amid))
File "/usr/local/bin/tos.py", line 209, in write
self._out_ack.wait(0.2)
File "/usr/lib/python2.5/threading.py", line 235, in wait
_sleep(delay)
KeyboardInterrupt
Thanks a lot.
Regards,
Pratik
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
