I answer this about ever 6 months. Here's a second order back link: http://www.mail-archive.com/[email protected]/msg11320.html And my list of what pins and signals do what on the Micas: http://www.etantdonnes.com/Motes/ATMEGApins.txt The connector is speced on the schematic as: Hirose DF9-51P-1V(54) which I've gotten from digikey.com. I don't remember offhand which (vis male/female) you need to get but they (usually) have links to the mfg's spec sheets so you can figure it out.
MS wolfgangmi wrote: > Dear all, > > I am using MICAz with TinyOS 1.1.15. I want to connect some general-purpose > I/Os on MICAz's processor to external hardware through the 51-pin connector > and read their values. My questions are: > > 1. What GPIOs in the 51-pin connector are available to users? Are INT0~INT3 > fine? > > 2. How to read the value of a certain GPIO on the processor in nesC code? Is > there any existing library function to do this? > > 3. Where can I find the detailed form factor of the 51-pin connector and > where can I order these parts? > > Thanks. > > Regards, > Wolfgang > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
