Yes, thats what eventually solved the problem. Thanks. On Fri, Feb 6, 2009 at 12:39 PM, Martin van de Goor < [email protected]> wrote:
> Hi, > Excuse me if you have checked this, but have you tried double checking the > connections? > I often get this error when the mote is connected to the mib520 board, but > is not exactly in the right position. > > Martin > > On Thu, Feb 5, 2009 at 00:28, Mohammad Sajjad Hossain > <[email protected]>wrote: > >> Hi,I am trying to install the Blink app in an iris mote using an mib520 >> board. I am issuing the following command: >> make iris install mib510,/dev/tty.usbserial-XBQQV3HRA >> Everything goes well expect at the end, I get this: >> ------------------- >> avrdude: AVR device initialized and ready to accept instructions >> >> Reading | ################################################## | 100% 0.05s >> >> avrdude: Device signature = 0x000000 >> avrdude: Yikes! Invalid device signature. >> Double check connections and try again, or use -F to override >> this check. >> >> >> avrdude done. Thank you. >> >> make: *** [program] Error 1 >> -------------------- >> I am using the most recent version of tinyOS and using mac OSX 10.5.6. Any >> idea what might be wrong? >> 'motelist' generates the following: >> >> Reference Device Description >> ---------- --------------------------- >> --------------------------------------- >> XBQQV3HRA /dev/tty.usbserial-XBQQV3HRA (none) >> XBQQV3HRB /dev/tty.usbserial-XBQQV3HRB (none) >> >> Any help will be appreciated. >> --sajjad >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
