Hi Brendan-- It sounds like a couple of people have been having this problem. I think we've reproduced it here (finally) and it seems specific to ubuntu, so I'll have a look this afternoon and see if I can get to the bottom of it. Hopefully I'll have a patch later today that fixes the issue.
Steve On Sat, Feb 7, 2009 at 5:38 AM, Brendan Cody Kenny <[email protected]>wrote: > Hi All, > > I had the same problem on ubuntu based distro. fixed it by checking > some of the following along with working through the readme: > > the readme mentions "$TOS_ROOT" which is not set by tinyos2.1.0 (it > sets $TOSROOT) so set $TOS_ROOT = $TOSROOT > > make sure that permissions are correct on ttyUSB1 and TTYUSB0 (i just > set them to 777 to be sure) > > I now get the tunnel up, have installed UPDEcho on some motes as per > readme, but there doesnt seem to be any communication between mote and > base station. > > I turn on the mote, expect it to contact the base station and the > driver sets up the routing. > > I am using the UDPEcho from conrtib as released 11-13-2008 and > everything else seems fine as instructed. > > Whats missing here? > > Thanks, > Brendan. > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
