If you are using XMesh app (XMDA300) then the data packet structure is different from that of XMDA320. The XServe manual provides packet structure and decoding info.
http://www.xbow.com/Support/Support_pdf_files/XServe_Users_Manual.pdf You will either need to modify the MDA320 LabVIEW drivers or create a new one. Regards, Giri ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Kimberly Kee Sent: Tuesday, February 17, 2009 6:44 AM To: [email protected] Subject: [Tinyos-help] Crossbow Technology: MDA300 Driver for Labview Hi all, I have created a GUI using Labview to read data from MDA300 and MTS400.. In Labview, the MDA320 can only reads Battery Voltage, ADC0 (V) and Time Stamp from my MDA300. I need to read the temperature and humidity data from MDA300 in Labview and I need to know how can I send a signal to MDA300 to excite the relay in it through Labview. I understand from Crossbow support that I need to produce a driver for MDA300 in order to achieve the mentioned objectives and I'd been redirected to seek help from the TinyOS group thru email. I was told that the driver for MDA300 might have been created by TinyOS group. Can anyone help me with my above question? Your help will be very much appreciated. Best Regards, Kimberly ________________________________ New Email addresses available on Yahoo! <http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http:/mail. promotions.yahoo.com/newdomains/aa/> Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does!
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
