Thank you for your help to figure out the problem with my setup. When trying
to install Blink I get the following output:
cher...@toshiba-laptop:/opt/tinyos-2.1.0/apps/Blink$ make micaz install
mkdir -p build/micaz
compiling BlinkAppC to a micaz binary
ncc -o build/micaz/main.exe -Os -Wall -Wshadow -Wnesc-all -target=micaz
-fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22
--param max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
-DIDENT_USERNAME=\"cherifa\" -DIDENT_HOSTNAME=\"toshiba-laptop\"
-DIDENT_USERHASH=0x56a83370L -DIDENT_TIMESTAMP=0x49aa54ceL
-DIDENT_UIDHASH=0x2a2700d0L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc
-lm
compiled BlinkAppC to build/micaz/main.exe
2052 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe
build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe
build/micaz/main.ihex
writing TOS image
cp build/micaz/main.srec build/micaz/main.srec.out
- Ignored:
installing micaz binary using dapa
uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verify
/dev/parport0: No such file or directory
Failed to open ppdev.
make: *** [program] Erreur 2
thank you.
Cherifa
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
