On Wed, 5 Nov 2008 16:18:52 -0600 "Janos Sallai" <[email protected]> wrote:
> It shouldn't be too complicated. Cretate a new directory called sht11 under > tos\platforms\iris\chips. Copy all files from > tos\platforms\telosa\chips\sht11to tos\platforms\iris\chips\sht11. Then, add > %T/platforms/iris/chips/sht11 to the includes list in > %T/platforms/iris/.platform. You will need to modify > tos\platforms\iris\chips\sht11\HplSensirionSht11C.nc to describe which pins > of the atmega1281 the sht11 is connected to. Obviously, you will nee to > replace HplMsp430GeneralIOC with HplAtm128GeneralIOC and HplMsp430InterruptC > with HplAtm128InterruptC. Anybody knows what GPIO and wath Interrupt are used for a MDA300 sht11 atachhed to a iris2. I'm readed the sensor board users manual but I didn't found any information Thanks a lot. -- Nunca confies en un S.O. del que no tienes código fuente ;-) -------------------------------- Javier Almansa Sobrino. Ingeniero Técnico en Informática de Sistemas. FSF #7032 Member (www.fsf.com) Grupo de Investigación ARCo. Escuela Superior de Informática. Ciudad Real Tel: (+34)926 29 53 00 Ext: 3705 _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
