Same for the IRIS, but use RF230_DEF_RFPOWER instead. Miklos On Tue, Mar 17, 2009 at 4:43 PM, Xiaohui Liu <[email protected]> wrote: > Hello, > > If you want to set TX power for every message, not per message, you have > another candidate: > In file TOSROOT/tos/chips/cc2420/CC2420.h , change CC2420_DEF_RFPOWER to > smaller value (default is 31). > > #ifndef CC2420_DEF_RFPOWER > #define CC2420_DEF_RFPOWER 31 > > You can also change the channel used in the same file. > > Cheers, > Xiaohui > > On Tue, Mar 17, 2009 at 12:26 AM, Miklos Maroti <[email protected]> > wrote: >> >> Hi, >> >> Use the PacketTransmitPower interface provided by the >> RF230ActiveMessageC component to set the TX power on a per message >> basis. >> >> Miklos >> >> 2009/3/17 Mohammad Sajjad Hossain <[email protected]>: >> > Hi, >> > I am trying to control the signal strength of IRIS and Telosb motes. >> > Basically I want them to be heard in a smaller area than the default. >> > Any >> > idea how I can do this during compilation or even run-time? >> > Thanks... >> > --sajjad >> > >> > _______________________________________________ >> > Tinyos-help mailing list >> > [email protected] >> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
