Hello !
I have checked : the nesc compiler is installed and configured also in my
PATH.
I have still the problem of : - MAIN.EXE is not found in build/pc
- ncc not found.
What it is probably the origin of these errors, though I have nesc
Installed?
Best Regards,
2009/3/28 Michael Schippling <[email protected]>
> Looks like you don't have the NESCC compiler installed,
> or more likely, in your PATH:
> *make: ncc: Command not found
>
> Try this:
> type ncc
> you should get something like:
> ncc is /usr/bin/ncc
>
> If not look for "ncc" in /usr/bin and elsewhere and search
> this list for advice on setting your PATH variable.
>
> MS
>
> wafa jaballah wrote:
>
>> Hello all
>>
>> I'm a new in programming in TinyOS and I have a question about compiling
>> an application.
>> In fact, I want to check the platforms supported by this applications
>> using the following command :
>>
>> *$ make tos.th <http://tos.th> system-wide*
>> Makerules:165: *** mica pc all tos.th <http://tos.th> system-wide
>>
>> Usage: make <platform>
>> make all
>> make clean
>> make install[.n] <platform>
>> make reinstall[.n] <platform> # no rebuild of target
>> make docs <platform>
>>
>> Valid platforms are: mica pc
>>
>> Stop.
>> The I type the following command to compile the application
>>
>> *$ make pc*
>> mkdir -p build/pc
>> compiling sim to a pc binary
>> ncc -board=micasb -o build/pc/main.exe -g -O0 -pthread -target=pc -Wall
>> -Wshado
>> w -DDEF_TOS_AM_GROUP=0x7d -fnesc-nido-tosnodes=1000
>> -fnesc-cfile=build/pc/app.c
>> sim.nc <http://sim.nc> -lm
>> *make: ncc: Command not found
>> make: *** [build/pc/main.exe] Error 127*
>>
>> I have take a look into the file MAKERULES in order to verify
>>
>> *BUILDDIR = build/$(PLATFORM)
>> MAIN_EXE = $(BUILDDIR)/main.exe
>> MAIN_SREC = $(BUILDDIR)/main.srec
>>
>> ifeq ($(PLATFORM), pc)
>> PFLAGS := -g -O0 -pthread $(PFLAGS) -fnesc-nido-tosnodes=1000
>> -fnesc-cfile=$(BUILDDIR)/app.c
>> MAIN_TARGET = $(MAIN_EXE)
>> else
>> PFLAGS := -Os $(PFLAGS) -finline-limit=100000
>> -fnesc-cfile=$(BUILDDIR)/app.c
>> MAIN_TARGET = $(MAIN_SREC)
>> endif
>>
>> NCC := $(NCC) -board=$(SENSORBOARD)
>>
>>
>> *I have realize that I don't have MAIN.EXE in the directory BUILD/PC in
>> my application.
>> I have attached the file MAKERULES.
>>
>> I don't know what is the problem?
>> Is there someone who could give me a hand ?
>> I will be very thankful.
>>
>> Best Regards,
>> *
>> *
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> [email protected]
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
> --
> Platform: WinXP/Cygwin
> TinyOS version: 1.x, Boomerang
> Programmer: MIB510
> Device(s): Mica2, MicaZ, Tmote
> Sensor board: homebrew
>
>
--
Wafa Ben Jaballah
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
