It wasn't me asking about the previous Timer questions. Many thanks for your hints. Will try and get back soon.
Ittipong 2009/4/21 Michael Schippling <[email protected]> > I guess this is what you were trying to get at in previous > Timer questions, right? > > It looks like it should work the way you want. The only thing > I can see that is questionable is the long atomic {block} for > your message sending in DataSendTimer.fired(). This might > block interrupts for too long. > > I would try to simplify the Timer scheme on it's own, flashing > LEDs or something to see if it works the way you expect, and then > start adding the radio message drivers back in. > > I think you should also be able to use the receive() method instead > of starting your first timer, because it is called after the message > is fully received. > > MS > > Ittipong Khemapech wrote: > >> Hi, >> >> I have been trying to figure the problems out for days. No idea what >> causes it. >> >> I have a source receiving a packet from the base station. After the SFD is >> received, a timer is called to run to make sure that the reception is >> completed. The source waits for a wait_interval duration to send its data >> packet. So, another timer is used for timing the transmission. >> >> I am using AlarmToTimer component. The command startOneShot is called. >> What I expect is that the source should send *only after* it receives the >> packet from base station. It seems to me that the source keeps sending. >> >> Look forward to hear from you soon. >> >> Thanks, >> Ittipong >> >> The codes are as follows: >> >> MyDef.h >> >> --------------------------------------------------------------------------------------------------- >> >> #ifndef MYDEF_H_ >> #define MYDEF_H_ >> >> enum { >> WAIT_TO_RECEIVE = 1024 >> }; >> >> #endif >> ================================================== >> >> SourceAppC.nc >> >> ---------------------------------------------------------------------------------------------------- >> >> #include "MyDef.h" #include "DataMsg.h" >> #include "ControlMsg.h" >> >> configuration SourceAppC { >> } >> implementation { >> components MainC; >> components ActiveMessageC; >> >> components new AMSenderC(AM_DATAMSG) as AMSenderDataC; >> components new AMReceiverC(AM_CONTROLMSG) as AMReceiverCtrlC; >> >> components new Alarm32khz32C() as Alarm2Timer; >> components new AlarmToTimerC(T32khz) as W2RTimer; components >> new AlarmToTimerC(T32khz) as SendTimer; >> >> components CC2420TransmitC; >> components CC2420ActiveMessageC; >> >> components SourceC as App; >> >> // Wiring >> App.Boot -> MainC; >> >> App.Packet -> AMSenderDataC; >> App.AMPacket -> AMSenderDataC; >> App.AMSend -> AMSenderDataC; >> App.Receive -> AMReceiverCtrlC; >> >> App.AMControl -> ActiveMessageC;; >> >> App.InitW2RTimer -> W2RTimer; App.DataSendTimer -> SendTimer; >> W2RTimer.Alarm -> Alarm2Timer; >> SendTimer.Alarm -> Alarm2Timer; >> App.CC2420Packet -> CC2420ActiveMessageC; >> App.RadioTimeStamping -> CC2420TransmitC; >> App.CC2420Transmit -> CC2420TransmitC; >> } >> ===================================================== >> >> SourceC.nc >> >> ---------------------------------------------------------------------------------------------------------- >> >> #include <Timer.h> >> #include "MyDef.h" #include "DataMsg.h" >> #include "ControlMsg.h" >> >> module SourceC { >> uses { >> interface Boot; >> interface AMSend; >> interface Receive; interface AMPacket; >> interface Packet; >> interface Timer<T32khz> as InitW2RTimer; >> interface Timer<T32khz> as DataSendTimer; >> interface RadioTimeStamping; interface SplitControl as >> AMControl; >> interface CC2420Packet; interface >> CC2420Transmit; >> } >> } >> implementation { >> message_t dpkt, cpkt; >> bool sending = FALSE; >> uint16_t pktseq, sentpkts; uint8_t current_tx; >> uint8_t base_addr, me; >> uint32_t no_slot, slot_length, slot_start; uint32_t >> wait_interval; >> >> uint16_t rcv_no; >> >> task void callInitW2RTimer() { >> call InitW2RTimer.startOneShot(WAIT_TO_RECEIVE); >> } >> >> task void callDataSendTimer() { >> call DataSendTimer.startOneShot(wait_interval); >> } >> >> event void Boot.booted() { >> call AMControl.start(); >> } >> >> event void AMControl.startDone(error_t err) { >> if (err != SUCCESS) { >> call AMControl.start(); >> } >> } >> >> event void AMControl.stopDone(error_t err) { >> } >> >> event void InitW2RTimer.fired() { >> post callDataSendTimer(); >> } >> event void DataSendTimer.fired() { >> >> if (!sending) { >> atomic { >> >> DataMsg* dataMsg = (DataMsg*)(call Packet.getPayload(&dpkt, >> NULL)); >> >> sentpkts++; >> pktseq++; >> >> call CC2420Packet.setPower(&dpkt, MAX_TX); >> current_tx = call CC2420Packet.getPower(&dpkt); >> dataMsg->pkt_type = 1; >> dataMsg->source_id = me; >> dataMsg->rcv_no = rcv_no; >> >> dataMsg->tx_power = current_tx; >> dataMsg->snt_no = sentpkts; >> dataMsg->seq_no = pktseq; >> dataMsg->slot = no_slot; >> dataMsg->length = slot_length; >> dataMsg->start = slot_start; >> dataMsg->wait = wait_interval; >> >> if (call AMSend.send(base_addr, &dpkt, sizeof(DataMsg)) == >> SUCCESS) { >> sending = TRUE; } >> } >> } >> >> } >> event void AMSend.sendDone(message_t *msg, error_t error) { >> if (&dpkt == msg) { >> atomic { >> sending = FALSE; >> } } >> } >> event message_t* Receive.receive(message_t* msg, void* payload, uint8_t >> len) { >> >> if (len == sizeof(ControlMsg)) { >> atomic { >> ControlMsg* controlMsg = (ControlMsg*) payload; >> >> base_addr = controlMsg->base_id; >> me = TOS_NODE_ID; >> >> rcv_no = controlMsg->snt_no; >> >> no_slot = controlMsg->no_alloc_slot; >> slot_length = controlMsg->slot_length; >> slot_start = controlMsg->slot_start; >> >> wait_interval = (uint32_t) (((me - 1) * slot_length) + >> slot_start); >> >> } >> } >> return msg; >> } >> >> >> async event void RadioTimeStamping.transmittedSFD(uint16_t time, >> message_t* p_msg) { >> } >> >> async event void RadioTimeStamping.receivedSFD(uint16_t time) { >> post callInitW2RTimer(); } >> >> async event void CC2420Transmit.sendDone(message_t* p_msg, error_t >> error) { >> } >> >> } >> ==================================================================== >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
