Hi all, Just wanted to announce to all of those who are interested on buying MDA300ca from Crossbow that they don't offer any driver for this device in TinyOS 2.x so far today. So, if you are interested on using it in your project take into account that unless you develop your own TinyOS 2.x driver your project will have to run in TinyOS 1.x.
Regards. Subject: --------------------------------------------------------------- Driver for TinyOS 2.x for MDA300CA Question: --------------------------------------------------------------- Hi, It seems that you are continuing the line of MDA300CA, however there is only a driver for this sensorboard in TinyOS 1.x, but what does happen with TinyOS 2.x? We are not able to use it with TinyOS 2.x as there is no drivers for it. It could be a nice idea to develop a driver, so you sells could improve. Regards. Response: --------------------------------------------------------------- Regarding the TinyOS drivers these are all made possible by the open source community which writes and distributes drivers for the MDA300. Please check with the open source community for further updates for TinyOS2.0 drivers for the MDA300 sensor board. Sincerely, Alex Pun Crossbow Technology, Inc www.xbow.com _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
