Could that just be the count of readings? MS
Mehmet Akif Antepli wrote: > Hi, > > I am using trying to take magnetic sensor data from MTS310 sensor board > (I use MicaZ motes). I have modified oscilloscope application. When I > use MagXC and MagYC interfaces, it works, but I want to increase the > sampling rate so i used MagXStreamC and MagYStreamC interfaces. > > I use the same message structure as in the Osciiloscope application. In > the oscilloscope_t struct, there is the field 'readings' which keeps 10 > sensor readings. The problem is that , first two entries in the > 'readings' array, are 0xa0 and 0x0 and they never change. Data in the > rest of the array is correct. > > I can get rid of those 'dummy' values. I just ignore them and send the > meaningful data over the radio to the base-station mote. > > But it shouldn't be this way and i couldn't figure out what i am doing > wrong. Maybe there is problem in the low level i2c code. > > Could anyone help me with this issue? > > Thanks in advance, > > -- > Mehmet Akif Antepli > Graduate student > Dept. of EEE > Middle East Technical University > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
