I use MoteWorks. I thought this based on TinyOS. But I would also use the standard TinyOS method if this works. How should I do that? Are there any HOWTOs or something like that?
Thomas On 6/1/09, Janos Sallai <[email protected]> wrote: > Thomas, > > Do you use MoteWorks or TinyOS 2.1? > > Janos > > On Mon, Jun 1, 2009 at 6:28 AM, Thomas Obermayer > <[email protected]> wrote: >> Hi. >> First thing I have to say is that I am a beginner to this topics. So >> please help me with my problem. >> >> My hardware: >> -Base station: MIB 520 (USB Blackbox) >> -XM2110 (Iris) >> -MTS420CC (with GPS Module) >> >> First I tried to get the blink example running. But I did not have >> success. The LED of the XM2110 did not blink. Instead the red led of >> the base station is now blinking. >> So my question is how I can load the blink project to the XM2110 and >> set the base state in normal mode again. >> >> For the compiling and installing I used the commands: >> make iris >> make iris install,com3 >> as described at MoteWorks_Getting_Started_Guide >> >> My goal is to get the GPS working. I thought the blink example is a >> good access... >> >> Can someone help me? please... >> Thomas >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
