Hi Thomas, There are two main options to program Iris and Iris OEM motes. First one, is to use the Moteworks software provided by Crossbow (supported by TinyOS 1.x), on the other hand, you could use TinyOS 2.1 (cygwin or linux).
I assume that you are running TinyOS 2.1, so if you want to install Blink application, the following command should work: make iris install.3 mib520,COM3 where the 3 number is the mote ID. where COM3 is the COM port where the Mib520 is attached in your computer. Hope this helps. In addition, let me give you some advices: In the case of Moteworks, you can use Moteconfig tool, so you dont need to know the sintax of the commands to program motes. But particularly I would remommend you to use TinyOS 2.1, cause the protocol, the programming language, and so on is better. Just be careful, if you are using MDA300 sensorboard or MTS410.. you should check before of taking a decision, cause some the drivers for those sensorboards are present in MoteWorks (provided by Crossbow), and are not offered in TinyOS yet, so you will have to develop by yourself. [email protected] writes: > Send Tinyos-help mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Tinyos-help digest..." > > > Today's Topics: > > 1. need help: XM2110, mib512 (xbow). (Thomas Obermayer) > 2. The message format for TraceRouteTestAODV application > ([email protected]) > 3. Re: need help: XM2110, mib512 (xbow). (Janos Sallai) > 4. Time Interval (Jane) > 5. Re: Using AVRISP Programmer !! (Janos Sallai) > 6. Re: Time Interval (Ruben Catteeuw) > 7. Re: need help: XM2110, mib512 (xbow). (Thomas Obermayer) > 8. Re: The message format for TraceRouteTestAODV application > (Michael Schippling) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 1 Jun 2009 13:28:43 +0200 > From: Thomas Obermayer <[email protected]> > Subject: [Tinyos-help] need help: XM2110, mib512 (xbow). > To: [email protected] > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi. > First thing I have to say is that I am a beginner to this topics. So > please help me with my problem. > > My hardware: > -Base station: MIB 520 (USB Blackbox) > -XM2110 (Iris) > -MTS420CC (with GPS Module) > > First I tried to get the blink example running. But I did not have > success. The LED of the XM2110 did not blink. Instead the red led of > the base station is now blinking. > So my question is how I can load the blink project to the XM2110 and > set the base state in normal mode again. > > For the compiling and installing I used the commands: > make iris > make iris install,com3 > as described at MoteWorks_Getting_Started_Guide > > My goal is to get the GPS working. I thought the blink example is a > good access... > > Can someone help me? please... > Thomas > > > ------------------------------ > > Message: 2 > Date: Mon, 01 Jun 2009 14:10:30 +0200 > From: [email protected] > Subject: [Tinyos-help] The message format for TraceRouteTestAODV > application > To: TinyOS help <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; > format="flowed" > > Hello > I m working with the protocol AODV(implemented in /contrib/hsn). > I have 4 motes: > one SINK with in ID=0 , one Base Station with ID=1 and the 2 others > have successively ID=2 and ID=4. > I have executed Listen to show the packets that are coming from motes > (ID=2;ID=4) to Sink_Node.So i have obtained this result: > FF FF 0D 7D 0B 02 00 00 02 01 00 01 00 00 00 00 > 02 00 0E 7D 07 00 00 00 02 00 00 00 > FF FF 0D 7D 0B 04 00 00 02 01 00 01 00 00 00 01 > 00 00 09 7D 1D 02 01 02 00 03 15 00 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > FF FF 0D 7D 0B 04 01 00 04 01 00 01 00 00 00 00 > 04 00 0E 7D 07 00 01 00 04 00 00 00 > FF FF 0D 7D 0B 02 02 00 04 01 00 01 00 00 00 01 > 00 00 09 7D 1D 04 02 04 00 03 15 00 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 03 02 00 03 15 01 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 03 04 00 03 15 01 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 04 02 00 03 15 02 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 04 04 00 03 15 02 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 05 02 00 03 15 03 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 05 04 00 03 15 03 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 06 02 00 03 15 04 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 06 04 00 03 15 04 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 07 02 00 03 15 05 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 07 04 00 03 15 05 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 08 02 00 03 15 06 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 08 04 00 03 15 06 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 02 09 02 00 03 15 07 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > 00 00 09 7D 1D 04 09 04 00 03 15 07 19 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > > I have identified the header of these messages ; but my problem is how > can I identify the payload?? > I m trying to understand the different programs implemented in > /contrib/hsn/tos to pick out the payload shown in this case. > I need our help. > Thanks > > > > ------------------------------ > > Message: 3 > Date: Mon, 1 Jun 2009 10:45:04 -0500 > From: Janos Sallai <[email protected]> > Subject: Re: [Tinyos-help] need help: XM2110, mib512 (xbow). > To: Thomas Obermayer <[email protected]>, tinyos forum > <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Thomas, > > Do you use MoteWorks or TinyOS 2.1? > > Janos > > On Mon, Jun 1, 2009 at 6:28 AM, Thomas Obermayer > <[email protected]> wrote: >> Hi. >> First thing I have to say is that I am a beginner to this topics. So >> please help me with my problem. >> >> My hardware: >> -Base station: MIB 520 (USB Blackbox) >> -XM2110 (Iris) >> -MTS420CC (with GPS Module) >> >> First I tried to get the blink example running. But I did not have >> success. The LED of the XM2110 did not blink. Instead the red led of >> the base station is now blinking. >> So my question is how I can load the blink project to the XM2110 and >> set the base state in normal mode again. >> >> For the compiling and installing I used the commands: >> make iris >> make iris install,com3 >> as described at MoteWorks_Getting_Started_Guide >> >> My goal is to get the GPS working. I thought the blink example is a >> good access... >> >> Can someone help me? please... >> Thomas >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > ------------------------------ > > Message: 4 > Date: Mon, 1 Jun 2009 08:49:06 -0700 (PDT) > From: Jane <[email protected]> > Subject: [Tinyos-help] Time Interval > To: [email protected] > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > I want to implement a loop that sends a jamming signal over a random period > of time, sleeps for a random period. I found the Random interface, but not > sure how to implement the time intervals. Is there a interface I could use to > perform the task? I have IRIS rf230. Thanks! > > YanYan > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090601/bce8077a/attachment-0001.htm > > > ------------------------------ > > Message: 5 > Date: Mon, 1 Jun 2009 10:55:45 -0500 > From: Janos Sallai <[email protected]> > Subject: Re: [Tinyos-help] Using AVRISP Programmer !! > To: Fahad Al-Jabarti <[email protected]>, tinyos forum > <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Fahad, > > make micaz install avrisp,/dev/ttySX should work. Replace /dev/ttySX > with whatever port your avrisp is connected. > > Janos > > 2009/5/29 Fahad Al-Jabarti <[email protected]>: >> Hi everyone, >> I'm building my own custom node ( which has the features of Micaz >> Platform)... now I'm trying to install applications on it... >> >> I only have AVRISP programmer, is it possible to use it to install ??? ?If >> yes, how would i do that ?? >> >> >> Cheers >> Fahad >> ________________________________ >> Express yourself instantly with MSN Messenger! MSN Messenger >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > > ------------------------------ > > Message: 6 > Date: Mon, 1 Jun 2009 15:59:05 +0000 > From: Ruben Catteeuw <[email protected]> > Subject: Re: [Tinyos-help] Time Interval > To: <[email protected]>, <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > > Hi, > > > > Why not just generate a random number with the Random interface and then > initialize a timer with this value? > > > > regards > > > > Ruben > > > > Date: Mon, 1 Jun 2009 08:49:06 -0700 > From: [email protected] > To: [email protected] > Subject: [Tinyos-help] Time Interval > > > > > > I want to implement a loop that sends a jamming signal over a random period > of time, sleeps for a random period. I found the Random interface, but not > sure how to implement the time intervals. Is there a interface I could use to > perform the task? I have IRIS rf230. Thanks! > > YanYan > > > > _________________________________________________________________ > Je hele online leven op ??n stek met Windows Live > http://www.microsoft.com/belux/nl/windows/windowslive/default.aspx > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090601/278d70ec/attachment-0001.htm > > > ------------------------------ > > Message: 7 > Date: Mon, 1 Jun 2009 18:18:13 +0200 > From: Thomas Obermayer <[email protected]> > Subject: Re: [Tinyos-help] need help: XM2110, mib512 (xbow). > To: [email protected] > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > I use MoteWorks. I thought this based on TinyOS. > But I would also use the standard TinyOS method if this works. > How should I do that? Are there any HOWTOs or something like that? > > Thomas > > On 6/1/09, Janos Sallai <[email protected]> wrote: >> Thomas, >> >> Do you use MoteWorks or TinyOS 2.1? >> >> Janos >> >> On Mon, Jun 1, 2009 at 6:28 AM, Thomas Obermayer >> <[email protected]> wrote: >>> Hi. >>> First thing I have to say is that I am a beginner to this topics. So >>> please help me with my problem. >>> >>> My hardware: >>> -Base station: MIB 520 (USB Blackbox) >>> -XM2110 (Iris) >>> -MTS420CC (with GPS Module) >>> >>> First I tried to get the blink example running. But I did not have >>> success. The LED of the XM2110 did not blink. Instead the red led of >>> the base station is now blinking. >>> So my question is how I can load the blink project to the XM2110 and >>> set the base state in normal mode again. >>> >>> For the compiling and installing I used the commands: >>> make iris >>> make iris install,com3 >>> as described at MoteWorks_Getting_Started_Guide >>> >>> My goal is to get the GPS working. I thought the blink example is a >>> good access... >>> >>> Can someone help me? please... >>> Thomas >>> _______________________________________________ >>> Tinyos-help mailing list >>> [email protected] >>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>> >> > > > ------------------------------ > > Message: 8 > Date: Mon, 01 Jun 2009 10:49:52 -0600 > From: Michael Schippling <[email protected]> > Subject: Re: [Tinyos-help] The message format for TraceRouteTestAODV > application > To: [email protected] > Cc: TinyOS help <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > One needs to know the platform and TOS version to make a full > determination because the structures differ in various fun ways. > However the first line of data appears to be standard T1 serial > format with 5 bytes of header, matching to tos/system/types/AM.h, > and 11 bytes of payload, which should match to whatever message > struct is assigned the 0x0D type. I don't know what the second > line, or subsequent lines that don't start with FF FF, represent. > Though the 02 00 and 00 00 lines seems to have the same message > format with different addresses and payload sizes. > > My general decoding algorithm is to find the sync mark, which Listen > removes and uses to trigger a newline. Then determine the header type > and match the various fields byte by byte, in low-byte-first order for > larger ints. Unless of course someone has used the nx types, for which > it's high byte first, but not in the headers... Easy, no? > > MS > > [email protected] wrote: >> Hello >> I m working with the protocol AODV(implemented in /contrib/hsn). >> I have 4 motes: >> one SINK with in ID=0 , one Base Station with ID=1 and the 2 others >> have successively ID=2 and ID=4. >> I have executed Listen to show the packets that are coming from motes >> (ID=2;ID=4) to Sink_Node.So i have obtained this result: >> FF FF 0D 7D 0B 02 00 00 02 01 00 01 00 00 00 00 >> 02 00 0E 7D 07 00 00 00 02 00 00 00 >> FF FF 0D 7D 0B 04 00 00 02 01 00 01 00 00 00 01 >> 00 00 09 7D 1D 02 01 02 00 03 15 00 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> FF FF 0D 7D 0B 04 01 00 04 01 00 01 00 00 00 00 >> 04 00 0E 7D 07 00 01 00 04 00 00 00 >> FF FF 0D 7D 0B 02 02 00 04 01 00 01 00 00 00 01 >> 00 00 09 7D 1D 04 02 04 00 03 15 00 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 03 02 00 03 15 01 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 03 04 00 03 15 01 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 04 02 00 03 15 02 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 04 04 00 03 15 02 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 05 02 00 03 15 03 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 05 04 00 03 15 03 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 06 02 00 03 15 04 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 06 04 00 03 15 04 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 07 02 00 03 15 05 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 07 04 00 03 15 05 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 08 02 00 03 15 06 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 08 04 00 03 15 06 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 02 09 02 00 03 15 07 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 09 7D 1D 04 09 04 00 03 15 07 19 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 >> >> I have identified the header of these messages ; but my problem is how >> can I identify the payload?? >> I m trying to understand the different programs implemented in >> /contrib/hsn/tos to pick out the payload shown in this case. >> I need our help. >> Thanks >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > ------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > End of Tinyos-help Digest, Vol 74, Issue 1 > ****************************************** _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
