Thank you very much Janos,
I fixed it yesterday in the end of the day, my solution was to move the
low number COM ports of other devices in order to put my MIB520 as COM1
and COM2, and it works!.. so I assume that it is a problem with COM port
number over 10 more or less. But I'll download from the directory you
sepecied me.
Thanks,
Javier.
Janos Sallai escribió:
Javier,
I assume you are under cygwin. We did have some issues with port
numbers higher than com9, but it has been fixed already. You will need
to update tinyos-2.x/support/make to CVS head, and you will need to
use COM12 instead of /dev/ttyS11.
Janos
2009/6/2 Javier Barbarán <[email protected]>:
Hi all,
I have a very strange behaviour in my TinyOS. I have a PC where
everything works fine, but in my laptop, that is the same installation,
I can install applications in MicaZ motes, but when I try to install
application in iris I get the following error:
$ make iris reinstall.1 mib510,/dev/ttyS11
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-1
TOS_NODE_ID=1 Ac
tiveMessageAddressC$addr=1
installing iris binary using mib510
avrdude -cmib510 -P/dev/ttyS11 -U hfuse:w:0xd9:m -pm1281 -U
efuse:w:0xff:m -CC:/
cygwin/etc/avrdude/avrdude.conf -U flash:w:build/iris/main.srec.out-1:a
avrdude: ser_open(): can't open device "/dev/ttyS11": El sistema no
puede encont
rar la ruta especificada.
make: *** [program] Error 1
It seems that it cannot find the COM port, but it exists because it is
the same COM port to program micaZ, so it seems that is something
related to the avrdude configuration or something like that, could you
help me? cause I dont have a trace.
Thanks.,
Javier Barbarán
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
