when i do what you say Michiel appears this: *a...@aldo-laptop:/etc/udev/rules.d$ /etc/init.d/udev reload * Reloading kernel event manager... No /sbin/udevd found running; none killed.
[fail] a...@aldo-laptop:/etc/udev/rules.d$ * and in dmesg: [ 1241.820055] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1242.073796] usb 2-2: configuration #1 chosen from 1 choice [ 1252.149330] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 1252.149365] generic-usb 0003:0451:F432.0002: timeout initializing reports [ 1252.150862] generic-usb 0003:0451:F432.0002: hiddev96,hidraw1: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-2/input1 [ 1252.162785] cdc_acm 2-2:1.0: This device cannot do calls on its own. It is no modem. [ 1252.162840] usbcore: registered new interface driver cdc_acm [ 1252.162850] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters the same as always... 2009/6/3 Michiel Konstapel <[email protected]> > You need to specify an additional parameter to make it pick the correct > configuration. The easiest way to do this automatically is to add a udev > rule. Create the following file: > > > > /etc/udev/rules.d/26-ti.rules > > > > With the contents: > > > > SUBSYSTEM=="usb_device" ACTION=="add" SYSFS{product}=="MSP-FET430UIF JTAG > Tool", SYSFS{bNumConfigurations}=="2", SYSFS{bConfigurationValue}=="1", > RUN+="/bin/sh -c 'echo 2 >/sys%p/device/bConfigurationValue'" > > > > Then, reload udev (/etc/init.d/udev reload) and replug the device. That > should result in a /dev/ttyUSB0. > > > > HTH, > > Michiel > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *aldo > *Sent:* dinsdag 2 juni 2009 21:31 > *To:* [email protected] > *Subject:* [Tinyos-help] Problems setting up MSP430 > > > > Hello, > > I'm very dissapointed. I can't do the driver ti_usb_3410_5052 to work. > when i plug the eZ430-RF2500 i see in dmesg: > > new full speed USB device using uhci_hcd and address 8 > [10543.862495] usb 2-2: configuration #1 chosen from 1 choice > [10543.866150] cdc_acm 2-2:1.0: This device cannot do calls on its own. It > is no modem. > [10553.925325] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c: > usb_submit_urb(ctrl) failed > [10553.925901] generic-usb 0003:0451:F432.0008: timeout initializing > reports > [10553.927537] generic-usb 0003:0451:F432.0008: hiddev96,hidraw1: USB HID > v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on > usb-0000:00:1d.0-2/input1 > > I'll tried a lot of things to achieve this in dmesg: > > usb 1-2: TI USB 3410 1 port adapter converter now attached to ttyUSB0 > > > Anyone can help me? any idea? > > Thank you in advance. > -- > aldo > -- aldo
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
