You would probably have to look at what I/O lines are used by each board to see what conflicts are possible. Xbow's Moteworks has drivers for (most/all) of their sensor boards, but I doubt that there are any combinatorics...
If you are wanting to use the MDA boards for their screw-terminals you can perhaps look into making a break-out board like mine: http://www.etantdonnes.com/Motes/MicaBOB/ (I don't have any more for sale, but the design is there to make your own). MS Jamie Ryan Wood wrote: > I was wondering if anyone has successfully combined either the MDA300 or > MDA320 Crossbow mote data boards with the MTS400 sensor boards. The > hardware allows for both to be connected to a wireless board (in my case > an iris) simultaneously, but there is no TOS images that I have seen > that can pull data from both devices. I made a few attempts to access > individual sensors on the MTS400, but have not made much progress. > > - Jamie > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
