Hello, By multiplexing radios - I meant hooked up another radio - this can be any serial radio or any serial device to be more general. I was hoping to get some numbers on the maximum data rate for the following scenario:
listening on the CC2420 radio, and dumping any packets receieved to the serial device on the UART 0. What are the packet losses - if any ? I assume there must be packet losses due to the resource sharing between UART and the CC2420 SPI bus. Thanks, Somnath On Fri, Aug 14, 2009 at 6:35 PM, Eric Decker<[email protected]> wrote: > what do you mean by "multilexing radios on uart0"? > > On Fri, Aug 14, 2009 at 12:41 PM, Somnath Mitra <[email protected]> wrote: >> >> Hello, >> >> Has anybody worked with any additional radios multiplexed on uart0 of >> the tmote ? Does anybody have any numbers on the data rates when >> trying to get data from the CC2420 and dumping it on the UART 0 of the >> tmote ? >> >> Somnath Mitra >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > -- > Eric B. Decker > Senior (over 50 :-) Researcher > Autonomous Systems Lab > Jack Baskin School of Engineering > UCSC > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
